For municipalities

Wastewater system solutions

Stop the threats of root intrusion and FOG in your wastewater system. Municipalities nationwide trust RootX and Grease-X to restore pipe flow quickly — and maintain maximum capacity long-term.

RootX + Grease-X

Maximum results, minimal impacts

Keep your wastewater system free from backups, without the high costs and damage of corrosive chemicals and mechanical cutting. RootX and Grease-X are bad news for blockages — and good news for your budget, infrastructure, and environment. 

  • Easy to use: Simple application for sewer pipes, service laterals, and lift stations
  • Budget-friendly: No special equipment or outside contractors needed
  • Non-corrosive: Will not harm components of your waste collection system 
  • Eco-smart: Low environmental impact and will not harm above-ground vegetation

I can prove we’re saving money, we’re providing better service, and the callouts now are rarely emergencies.

Wastewater Systems Supervisor and Chief Plant Operator

Terry Turner

Amidst the lush Great Central Valley, root intrusion is ever-present. Thanks to RootX, the town of Ceres, CA maintains root-free pipes below while verdant vegetation thrives above. They’ve gone from dozens of expensive emergency callouts to effective prevention — using their own crews and eliminating thousands in overtime costs.

Fast, affordable, effective

RootX for municipalities

Tackle root intrusion throughout your entire wastewater system. RootX kills roots on contact — reaching the top of the pipe where 90% of roots are found — and fights regrowth for 12+ months. You’ll save time and money by using your own crews and equipment, eliminating sanitary system overflows, and avoiding service interruptions. Plus, the low-environmental-impact formula is accepted by the EPA in all 50 states. 

RootX: it’s simple, it’s cost-effective — and it works. 

Powerful, easy to use, economical

Grease-X for municipalities

Stop FOG from clouding your wastewater system. Fast-acting emulsifiers break down fats, oils, and grease in your sewer lines and lift stations to clear blockages rapidly. Then, regular maintenance applications develop thriving colonies of natural microorganisms that digest organic waste to prevent future buildup. Non-polluting, biodegradable formulas are not only environmentally friendly — they also improve pipe line flow and wastewater plant efficiency. 

Treatment is quick and easy with your own equipment, and costs just pennies per foot.

The product works great and it’s priced great. I will continue to use the Grease-X product.

Bridge Plumbing, UT

Scott Johnson

If you have ongoing backups, you need a long-lasting solution. Preventative maintenance with Grease-X prevents FOG buildup before it stops up your pipe flow — and it costs just pennies per application.

Resources

Tips, tricks, & how-tos

FAQs for municipalities

Find the answers you need to keep your wastewater system free from roots and FOG.

How long does it take to apply RootX?

Depending on the application method you choose, it could take as little take 5 to 20 minutes to apply RootX!. For municipal pipes you can apply using the FDU 300 Applicator, Vacuum Method or the Direct Pour Method.

How often should RootX be applied?

For 8" and larger lines you should apply RootX at least every 24 months. For 6" and smaller lines we suggest once a year applications.

What’s the difference between mechanical cutting and chemical root control with RootX?

Mechanical root cutting is like pruning a tree. A root cutter is snaked through the pipe to cut off the roots inside. The process inevitably leaves some roots behind in the pipe. Cutting also stimulates vigorous re-growth in the remaining roots. That means new root growth can fully clog your pipe again in just months. This cycle of cutting roots, regrowth, and cutting again can eventually destroy the structural integrity of the pipe. Mechanical cutting is time-consuming complex, and requires returning to the same section of the pipe multiple times a year to cut out the new root growth..

Treating pipes with RootX takes less time than mechanical cutting, the results last longer, and the process won’t harm your pipes. RootX kills roots on contact; the dead roots decay over time and are carried out with the flow of the pipe, restoring the pipe to its full capacity. RootX also leaves a barrier on the pipe walls to prevent future root growth. Once you’re on a maintenance program with regularl RootX treatments, you should be able to eliminate mechanical root cutting in most cases. Best of all, it will free up your crews to be able to focus their time in area of more importance.

Contact your Rep

Have questions or need help ordering? Our experts are here to help!

RootX cost calculator

Plan your municipal root treatment budget with our handy calculator.

A signboard with the text RootX Gelco Supply Inc
CLEAR LINES AHEAD

Order your RootX and Grease-X